![]() ![]() InitRfFreqDependentHw(1): ExtGpioA = 0x5d ExtGpioB = 0xa5 InitRfFreqDependentHw(1): Tuner Register0 = 0x043420 Mir_sdr_2500_Init: adjusting squelch trim 0x1, rx gating enable 1, tx_trim 0, reg2 = 0x4801 Mir_sdr_Init: starting hardware initialization Result in changing it here, too (with an internal reconfiguration).īookmarksFile is /Volumes/Users/jerryn/.config/gqrx/bookmarks.csv which is the current default output audio device.Ĭhanging the default output audio device in the System Preferences will Using output audio device 'Built-in Line Output'. ![]() Gr::log :INFO: audio source - Audio sink arch: osx Gr-osmosdr v0.1.x-xxx-xunknown (0.1.5git) gnuradio 3.7.10.1īuilt-in source types: file fcd rtl rtl_tcp uhd hackrf bladerf rfspace airspy soapy * RfNotch Enable - RF Notch Filter Control * ExtRef Enable - External Reference Control Opened device with idVendor = 0x1df7 idProduct = 0x3010 fwVersion = 0x0207 busNum = 000 portNum = 003 Mir_sdr_usb_SetDeviceIdx idx=0 numDevices=1 # Soapy SDR - the SDR abstraction library Next, do the upgrade 'sudo port -d upgrade -enforce-variants gr-osmosdr +sdrplay' - this will fail because the checksums are wrong, but it tells you what they should be - put the new checksums into the PortFile and the upgrade should succeed. Then, you copy that into place - 'sudo cp mir_sdr_api_MacOSX_1.7.tar.gz /opt/local/var/macports/distfiles/gr-osmosdr/'. Then 'tar -zcvf mir_sdr_api_MacOSX_1.7.tar.gz' to create the tar file. Create a folder called "mir_sdr_api_MacOSX_1.7" and 'cp /usr/local/include/mirsdrapi-rsp.h mir_sdr_api_MacOSX_1.7/mir_sd.h' and 'cp /usr/local/lib/libmirsdrapi-rsp-i386-1.8.1.so mir_sdr_api_MacOSX_1.7/libmir_sdr.so'. Next, you need to create the "mir_sdr_api_MacOSX_1.7.tar.gz" file. Next, from the link ( ) that you pointed out you get the "gr-osmosdr_sdrplay_1.7.diff" file and copy the changes into the gr-osmosdr "Portfile" (/opt/local/var/macports/sources//release/tarballs/ports/science/gr-osmosdr/Portfile - I used TextWrangle). Next, do the standard install for gqrx and gnuradio, 'sudo port install gqrx'. The simplest way is to first install CubicSDR and SoapySDR as other people suggested. With, El Capitan you get a 'sdrplay' option. With, Yosemite you create a 'soapy' option for gqrx. I managed to add SDRplay functionality for gqrx and gnuradio-companion with Macports under Yosemite last night and using El Capitan this afternoon. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |